(Picture 12) You want there to be a little room so you can move the white part of the eye. Make sure you like up the black brads together or the eyes will look odd (Picture11)īend the back of the brads inside the body, but not right next to the body. I lined up the black brad with one of the front feet and went down about 8 rows. Stick the brad through the hole and you have your eye (Picture 9) Take one of your circles and cut out an 'X' off to the side but not too close to the edge I dabbed on a bit of hot glue and let it cool a bit, then pushed it down and held it with your finger, but you should of course not do this because you will burn yourself (Picture 7) (Picture 6)įold over and glue the four corners you just created by folding over the other corners.

Hot glue is the best because it dries fast (Picture 5)įold over and glue the four corners of the black square. Put a dab of hot glue on the head of the brad and stick it to the center of the back square. Step 4: Ghost Eyes and Putting Them TogetherĬut out 8 3/4 inch by 3/4 inch square pieces of black feltĬut out white circles about 1 1/4 inch in diameter (I used a botton as a guide) (Picture 4) closed and leave a tail to use to sew to body *Author Nina Tangled recommends on round 16 to stitch around in front loop only use the back loops to sew in the bottom piece Especially the little ghost feet! You will need your Pink, Turquoise, Red, and yellowish Tan color yarns. I put in some stuffing when I started to make it easier to grab him and then finished stuffing him before I finished crocheting him up. It will look like he has many lip piercings. To make it easier and make sure the piece attaches evenly, use paperclips to hold the mouth to his body. If you marked where you stopped increasing and started decreasing you should be able to match up the corners of the black piece easily to the corners of his mouth. I single crocheted around with yellow yarn. To attach the mouth on the body, start at one corner of the black piece and one corner of Pac Man's mouth.

You will have to decide how long the mouth piece needs to be based on how big your Pac-Man's body ends up being. 1, turn (It might help later to keep a marker here) from the end, but this caused a big hole to show so I think a magic ring works better because it makes the stitches tighter) Magic Ring 5, ch 1, turn (I tried to do this with just chaining 2 and then crocheting 5 sc. The main body is Yellow and his mouth is Black.

Pac man characters ghosts